Tube and pipe cleaning

Tube and pipe cleaning

Tube and pipe cleaning system

Tube and pipe cleaning system

Tube and pipe cleaning system

You are at right place for your requirement of tube cleaning by hydrojetting.

PressureJet offers high pressure tube & pipe cleaning system and ultra high pressure water jetting system for evaporator tube cleaning, condenser tube cleaning, heat exchanger tube cleaning & various pipe cleaning applications. PressureJet offers pipe cleaning equipment ranging from 100 bar to 2800 bar pressure. There are many advantages of using hydro jetting over chemical cleaning, brush cleaning, water pipe cleaning and several other conventional methods.

ADVANTAGES OF WATER JETTING FOR TUBE & PIPE CLEANING

  • Suitable to clean tubes of all material without harm, from brass to titanium
  • Inhibits corrosion and extends tube life by removing corrosive deposits from inside of the tubes and tube pits.
  • Cleans any length and diameter of straight or U-tube heat exchanger.
  • Extends maximum operating efficiency by removing fine layer of silt and organic debris, which is missed by mechanical cleaning and leads to rapid refouling.
  • Removes any foreign scale deposit.
  • Environmental safety - No chemical discharges or hazardous waste removal.
  • Custom designed cleaning nozzles, which offer full 360° inner diameter cleaning without streaking tube.
  • Multiple lance systems - up to 8 (or more) operators for fast cleaning of large main condensers.
  • Radiological waste minimization with the use of our positive shut off pressure control systems.
  • Cost Effective - restored baseline performance and extended refouling rates; promptly recovers job expense (in exponential fashion).

Tube cleaning is the process for cleaning and maintaining fouled tubes. Chemical tube cleaning is required to remove deposits and obstructions, which are caused by the liquids, which run through the tubing. The chemical tube cleaning process can help prevent corrosion due to deposits, which can also create tube failure.

High pressure water jet tube & pipe cleaning is widely used in various industries like textile, pharma, steel, chemical, refineries & many other industries for different applications.

PressureJet has supplied many such high pressure waterjet tube & pipe cleaning systems, condensor tube cleaning systems, boiler tube cleaning systems in different industries in all over India & other countries like South Africa, Malaysia, Philippines, Thailand, Korea, Iran, Saudi Arabia, Brazil, Mexico, Israel, Indonesia & many more

However, you please go through the below mentioned chart where you will come to know about the different range of flow rate, pressure and hp of different high pressure water jet tube cleaning system.

MOST POPULAR TUBE CLEANING SYSTEMS OF PRESSUREJET

TUBE CLEANING SYSTEMS - AR SERIES

Model SPM Flow rate (lpm) Max. rated pressure-
kg/cm2 (motor-hp)
AR 13.200
1450
13
200 (7.5)
AR 14.140
1450
14
140 (5)
AR 14.170
3000
14
160 (6)
AR 15.250
1450
15
250 (10)
AR 15.500
1450
15
500 (20)
AR 17.350
1450
17
350 (15)
AR 21.200
1450
21
200 (12.5)
AR 22.500
1450
22
500 (30)
AR 30.200
1450
30
190 (15)

TUBE CLEANING SYSTEMS - PB SERIES

Model SPM Flow rate (lpm) Max. rated pressure-kg/cm2 (motor-hp)
PB 18 950 28 480(40) -
730 22 480(30) 400(25)
PB 20 950 35 390(40) 325(30)
PB 22 950 43 320(40) -

TUBE CLEANING SYSTEMS - KB SERIES

MAX. SPM. IS 530 WITH 1500 RPM MOTOR
Model Flow rate (lpm) Max. rated pressure-kg/cm2 (motor-hp)
    60 hp 75 hp 100 hp
KB 20 35 620 750 -
KB 22 45 500 625 840
KB 24 52 430 530 720
KB 26 62 360 450 600
KB 28 70 310 375 510
KB 30 80 270 330 450
KB 32 90 240 300 400

TUBE CLEANING SYSTEMS - KD SERIES

MAX. SPM. IS 435 WITH 1500 RPM MOTOR
Model Flow rate (lpm) Max. rated pressure-kg/cm2 (motor-hp)
    100 hp 120 hp 150 hp
KD 22 52 775 - -
KD 24 62 655 790 -
KD 26 73 560 670 770
KD 28 84 485 580 665
KD 30 97 420 - -
KD 32 110 370 445 -

Pump with diesel engine can also be supplied

In recent years of advancement, high pressure water jet pumps are used for this application. High pressure tube cleaning system leaves a smooth, residue-free surface without costly clean-up and disposal of chemicals.

MPORTANT ACCESSORIES FOR PIPE & TUBE CLEANING SYSTEM

PressureJet offers following specifically designed pipe & tube cleaning accessories

  • Different types of conventional tube & pipe cleaning nozzles for forward firing, backward firing, radial firing & any combinations of this.
  • Rotating tube cleaning nozzles
  • High pressure flexible lance
  • High pressure waterjet rubber hose
  • Foot operated valve
  • Pneumatically controlled flexible lance operating system
  • Automatic lancing machine with rigid lance
  • Telescopic Positioning device
  • Centralisers
  • Lancing Rails
  • Single, dual & triple lancing systems
  • Hose catcher anti-withdrawal device
  • Line mole backout preventers

Quick Enquiry
X
Enquiry for Tube and pipe cleaning