Category
TECHNICAL SPECIFICATION
  Flow
:
  9 lpm (2.37 gpm)
  Working pressure
:
  140 bar (2030 psi)
  Inlet pressure
:
  Flooded to 3 bar (45 psi)
  Motor hp
:
  4 hp
  Speed
:
  1450 rpm
  Plunger dia
:
  18 mm
  Max. liquid temp.
:
  70o C (160oF)
  Oil capacity
:
  0.4 ltr
  Weight
:
  6.5 kg
  Over all dimension
:
  224.5 x 178 x 127.5

 

SPECIAL FEATURES

1.Pump head:

1.1 Forged brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
1.2 Intel and Discharge Ports: Heavy bosses for added strength. Offset discharge ports: High efficiency, smooth flow.
1.3 Bolts : Eight bolts: 6mm, grade 12.9

 

2. Complete valves:

2.1 Ultra form cages: Durability, strength and long life.
2.2 Poppets, seat and spring: 303 and 400 series stainless steel.
2.3 Valve caps: Machined brass – greater strength.

 

3. Packing:

3.1 High pressure packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
3.2 Low pressure seals: “U” cup double lip Buna-N, good positive seal.
3.3 Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.

 

 AR-14-140.jpg

4. Plungers:

Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.

 

5. Pump body:

 Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).

 

6. Plunger Roads:

Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.

 

7. Connecting Rods:

One-piece special alloy aluminium based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

 

8. Crankshaft:

Forged, precision ground and hardened for extremely long life and durability.

 

9. Bearing:

Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side.

 

EXTRA FEATURES

  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Wet end repair: Very simple no the special tools are required.

SUPERIOR DESIGN

  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
  • Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

EXPLODED VIEW

AR-14.140.JPG











Part Listing:

Sr.NoItem NameItem CodeQty Price (INR) Weight (KG) Desc.
1 960160 O-ring dia 17.86 X 2.62* 960160 1 40.00 0.001 View
2 1260162 Valve plug 1260162 1 620.00 0.070 View
3 1269050 Complete valve (available in kit 1864) 1269050(H) 1 0.00 0.010 View
4 880830 O-ring dia 15.54 X 2.62* (available in kit) 880830 *(H)(O)(N)(AG) 1 40.00 0.001 View
5 620301 Plug 1/8 G (Brass) 620301 1 250.00 0.010 View
6 1780130 Support ring dia 15mm (available in kit 2740) 1780130(T) 1 0.00 0.010 View
7 1260130 High pressure packing dia 15mm (available in kit 2741) 1260130(U) 1 0.00 0.010 View
8 1780090 Piston guide dia 15mm 1780090 1 330.00 0.020 View
9 1780010 Pump body 1780010 1 6,780.00 2.000 View
10 1266740 Side cover seal (available in kit) 1266740 *(AE)(G)(AF) 1 200.00 0.020 View
11 Circlip B-52 CB52 1 90.00 0.010 View
12 Circlip A-20 CA20 1 40.00 0.001 View
13 6304 Ball bearing 6304BB 1 380.00 0.150 View
14 880130 Oil cap 880130 1 370.00 0.001 View
15 1780050 Piston pin 1780050 1 110.00 0.010 View
16 1780510 O-ring dia 106 X 3*(available in kit) 1780510 *(AE)(AF)(E) 1 90.00 0.001 View
17 H.T. cap screw M-6 X 16 HTCSM6X16 1 15.00 0.001 View
18 1789010 Complete cover 1789010 1 1,100.00 0.230 View
19 1780040 Connecting rod 1780040 1 735.00 0.090 View
20 1780060 Guiding piston 1780060 1 874.00 0.070 View
21 480480 O-ring dia 4.48 X 1.78* (available in kit) 480480(R) 1 40.00 0.001 View
22 1260091 Spacer (available in kit) 1260091(R) 1 60.00 0.001 View
23 1780070 Ceramic plunger dia 15mm (available in kit 2739) 1780070(S) 1 0.00 0.030 View
24 1260100 Washer (copper washer 8X13X0.5)* (available in kit) 1260100(R) 1 60.00 0.001 View
25 1260110 Nut M-8 (SS) (available in kit) 1260110(R) 1 150.00 0.001 View
27 740290 O-ring dia 14 X 1.78* 740290 1 40.00 0.001 View
28 1980740 Plug 3/8" G (Brass)* 1980740 1 250.00 0.025 View
30 1260460 Oil seal (15X24X5)* (available in kit) 1260460 *(G)(I)(AE)(AF) 1 0.00 0.001 View
31 1780100 Rear piston guide dia 15mm 1780100 1 250.00 0.020 View
32 770260 O-ring dia 23.52 X 1.78* (available in kit) 770260 *(X)(U) 1 40.00 0.001 View
33 1260440 Low pressure seal dia 15mm (available in kit) 1260440 *(J)(U) 1 0.00 0.001 View
34 820361 Plug 1/2" G (Brass)* 820361 1 200.00 0.050 View
35 180101 O-ring dia 17.5 X 2* 180101 1 40.00 0.001 View
36 1780020 Pump head 1780020 1 8,604.00 2.200 View
37 Plain washer M.S. 16 Swg 6mm PWMS16S6 1 15.00 0.001 View
38 H.T. cap screw M-6x60 HTCSM6X60 1 25.00 0.020 View
40 1321190 Bearing (HK-4516 Niddle) 1321190 1 1,190.00 0.030 View
41 1321080 Snap ring 1321080 1 335.00 0.001 View
45 1780180 Crank shaft 1780180 1 6,378.00 0.950 View
46 Parallel key 8X7X25MM PK8X7X25 1 80.00 0.001 View
47 1260750 Oil seal (52X25X7)* (available in kit) 1260750 *(I)(AE) 1 0.00 0.010 View
48 1864 Valve kit (1 kit for each pump) 1864(H) 1 1,860.00 0.075 View
49 2739 Piston kit dia 15mm (1 kit for each Pump) 2739 1 4,450.00 0.050 View
50 2786 Oil seals kit (1 kit for each pump) 2786(AE) 1 1,380.00 0.045 View
51 2741 Water seal kit dia 15mm (1 kit for each Pump) 2741 1 2,800.00 0.025 View
52 2740 Support rings kit dia 15mm (1 kit for each pump) 2740 1 190.00 0.050 View




 
copyright © 2008 | All Rights reserved | Pressurejet