v>
Sewer jetting pump equipments
 Sewer cleaning equipment
   Swer Drain jetter machine    Sewer cleaning
Sewer jetting pump equipment
Drain jetters pump equipment
Sewer cleaning pump equipment

 

For technical and sanitary reasons, sewer jetting pump equipment are frequently cleaned. Particularly, the blocking of the cross sections as well as odour problems need to be avoided. Also, damages at the channel walls must be recognized very early, which is only possible, if the walls are completely clean. Further, inorganic deposits that reduce the sewage treatment efficiency must be removed.

 

Sewer jetting / drain jetting / gutter cleaning is the process of using sewer jetting pump equipment to bring a sewer drain line back to like-new condition without having to actually replace the line. This is very cost-effective practice, as well as a nearly effortless task- especially for drain jetting that are heavily used, even for grease. (You aren't supposed to be dumping that down there in the first place!).

 

Anyone, who has ever had to deal with a sewer or even residential septic tank, knows all about clogs and back-ups. Soap scum residue, grease, hair, food, mineral deposits and more can all cause a drain to back up. As much as people try to be careful with what they send down the tube, it is almost inevitable that these things will at some time pass through eventually causing clogs. Even as careful as you are with grease- you may not directly dump it down the drain- but the remaining grease on pots, pans and plates can cause a film that over the years can build up and solidify. Sometimes a simple unclogging could do but after masses of build-up and too frequent blockages, perhaps a good sewer jetting would be a more effective method that will also last plenty longer.

 

Pressure Jet's high pressure drain jetting pump equipment, drain jetting are completely suitable to achieve all above cleaning results, because these pumps are rugged in construction, have medium speed and perform to the entire satisfaction of the customer.

 

There are special sewer jetting pump equipment , designed specifically for this purpose, called sewer jetting. They can clean the pipes leading from sinks and bathtubs leading to the tanks, even those at long distances, which is especially helpful in the case of industrial piping. The sewer jetting work at a high pressure, between 150-300 bar and 12-400 lpm. The pressure can be adjusted throughout the job as needed. These sewer jetting pump equipment use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways. This essentially scours the pipes clean and then washes the debris back up to be removed, usually through a vacuum pump.

 

These kinds of systems are successfully running in different municipal corporations.

 

WHAT SIZE SEWER CLEANING HOSE DO I USE?

  • 2" - 6" pipe lines use 1/4" size drain jetting hose
  • 5" - 10" pipe lines use 3/8" size sewer cleaning hose
  • 8" - 12" pipe lines use ½" size sewer jetting hose
  • 10" or larger pipe lines use ¾" size sewer blasting hose. Important Accessories for sewer jetting system

 


 

HW Series


HW Series
Model Flow Rate
in LPM
Pressure in bar
(Min. Engine HP Required)
Select
NHD1415R 14 150(8)
100(5.5)
80(5)
NPM1525R 15 250(15)
180(10)
140(8)
NMT2120R 21 200(16)
180(15)
130(11)
NLT3020IR 30 200(23)
155(18)
125(15)
XLT4017IR 40 170(26)
140(23)
95(15)
XLT5415IR 54 150(28)
130(27)
100(21)
XXT7015IR 70 150(32)
130(28)
100(27)
PA Series


PA Series
Model Flow Rate
in LPM
Pressure in bar
(Min. Engine HP Required)
Select
PA30 80 175(45)
155(40)
115(30)
PA32 91 150(44)
125(37)
100(30)
PA36 115 120(45)
90(29)
PA45 150 100(50)
75(36)
VA Series


VA Series
Model Flow Rate
in LPM
Pressure in bar
(Min. Engine HP Required)
Select
VA40 107 180(60)
150(50)
120(40)
129 180(72)
140(56)
100(40)
171 170(90)
140(75)
100(30)
VA45 163 150(76)
130(65)
100(50)
217 130(90)
100(68)
KB Series


KB Series
Model Flow Rate
in LPM
Pressure in bar
(Min. Engine HP Required)
Select
KBD45 200 200(124)
150(93)
100(62)
KBD50 265 155(127)
130(107)
100(82)
KD Series


KD Series
Model Flow Rate
in LPM
Pressure in bar
(Min. Engine HP Required)
Select
KDC55 374 210(244)
185(216)
155(180)
KDC60 445 180(248)
155(213)
130(180)
Pressure Regulating Valve

Pressure Regulating Valve

  • Regulate output pressure as required
  • Bypass excess water
Drain jetting nozzle

Drain Jetting Nozzle

  • Easy to clean
  • Easy to maintain
  • Concentrated jet pattern
copyright © 2018 | All Rights reserved | Pressurejet